Specifications

3. Align pin 1 on the ribbon cable with pin 1 on the connector of
the internal SCSI device.
4. Carefully insert the ribbon cable into the connector of the
internal device. Press on the connector until the cable is seated
firmly in the socket.
5. If you have a desktop computer, carefully route any excess
cable away from other internal cables and the main system
board as you reinstall the subassembly. Do not attach the SCSI
cable to the tie wrap (if present). See your EISA Series User’s
Guide for details.
If you have a tower computer, carefully route the cable away
from other internal cables and along the drive housing
support rail. Use the tie wrap that came with the SCSI adapter
card to attach the cable to the support rail.
Setting Up the SCSI Interface 2-7