Specifications

Connecting the SCSI cable to the SCSI device
After installing an internal SCSI device, you must attach the
50-pin, SCSI ribbon cable to it. Follow these steps:
1. Locate the 50-pin, SCSI ribbon cable. Notice pin 1 on the
cable, which is designated by a red stripe.
red stripe
red stripe
-pin 1
SCSI adapter card connector
2. Locate the SCSI connector on the SCSI device. Notice the
location of pin 1 on the connector. See the documentation
that came with the SCSI device for instructions on the proper
orientation of pin 1.
2-6
Setting Up the SCSI Interface