Specifications

Installing Multiple SCSI Adapter Cards
If you are installing more than one SCSI adapter card in your
system, you must set all the cards to Enhanced mode as described
in Chapter 3.
Also, each adapter card must be set to a different BIOS address
and the interrupt assignments of each each card must not conflict.
The system automatically assigns different addresses to all option
cards when you run your computer’s System Configuration
program, described in Chapter 3.
Turning On SCSI Devices
When you are ready to use your SCSI devices, you must be careful
to turn them on in the proper sequence to allow information to
pass through the SCSI interface.
Turn on all external SCSI devices you plan to use. Wait a few
seconds; then turn on the computer.
1-6 The SCSI Interface