Specifications

Removing and Inserting Terminators
To remove a terminator, use long-nose pliers or tweezers. Gently
grasp the terminator and pull it straight up and off the card.
Note
The terminators are fragile so handle them carefully.
To replace a terminator, make sure the pins on the terminator
align with the socket; then press firmly until the terminator is
securely seated. Make sure pin 1 on the terminator (identified by
a dot) aligns with pin 1 of the socket on the circuit board.
Parity Checking
The SCSI adapter card supports odd parity checking. If you enable
parity checking, make sure that all devices you connect to the
SCSI interface are set for odd parity checking. If one or more
devices do not support odd parity checking, disable parity
checking using the System Configuration program.
Single-ended Devices
The SCSI adapter card supports single-ended devices only. Make
sure that all devices you connect to the SCSI interface are
configured as single-ended devices.
Caution
Connecting a differential device to the SCSI interface can severely
damage all single-ended devices on the interface.
The SCSI Interface
l-5