Technical data

dnet(7D) Devices SunOS 5.5

bncaui For BNC/AUI connectivity use bncaui=1, for RJ-45 use

bncaui=0. RJ-45 is the default.

fulldup For full duplex operation use fulldup=1, for half duplex use

fulldup=0. Half-duplex operation gives better results on older

10mbit networks. mode For 10mbit operation use mode=10, for

100mbit operation use mode=100. Certain 21140 based cards

will operate at either speed. Use the mode property to override

the 100mbit default in this case.

FILES /dev/dnet character special device

/plaform/i86pc/kernel/drv/dnet.conf conﬁguration ﬁle