Installation guide

Follow these steps to attach a Digital Video Camera to your

AFW-4300.

Using a standard 6-to-4-pin 1394 cable, plug the larger connector

(6-pin) of the cable into the external 1394 port on AFW-4300.

Plug the smaller connector (4-pin) of the 1394 cable into the

1394 port on your digital video camera.

You are now ready to install the 1394 software included with the

AFW-4300. See the installation instructions included on your

CD-ROM jacket cover for more information.

ATTACHING A DIGITAL VIDEO CAMERA

STEP 1

4-pin Connector

6-pin Connector

STEP 2

When inserting the 4-pin connector of the 1394

cable into the DV camera, make sure the connector and the

1394 port are properly aligned. Failure to do so can bend the

pins and damage the internal connector of the camera.

There are two types of 1394 connectors commonly

used; a 4-pin and a 6-pin. The AFW-4300 has three 6-pin

connectors on it. Digital Video cameras use a 4-pin

connection and may not include the cable. Other peripherals

typically use a 6-pin connection and include a corresponding

6-to-6-pin cable for you to connect the device to your

FireConnect 4300.

CAUTION

NOTE

STEP 3

1394IG.fm Page 5 Thursday, November 9, 2000 8:55 AM