Specifications

PSB No: S - 0107
Page 2 of 2
It is not possible to use the EEMM286.SYS driver in any other format or to
specify size of memory to address in config.sys. (re: page 6- 37 4.01 DOS
manual).
At boot- up, EEMM286.SYS will read setup for the amount of expanded
memory selected and convert it to pages, test and install the driver.
MEMORY CONFIGURATION CHART
Setup: Base Mem.
Type 1
640 KB
Type 2
640 KB
Upper 384K
Disabled
Enabled *
Expanded
Ext above 1MB
Exp above 1MB
- e-s - - - -
Displayed *
--e-m-
Displayed *
Type 3
640 KB
Disabled
Displayed
------
Type 4 640 KB
Enabled *
Expanded
Displayed
------
Type 5
640 KB Enabled
Displayed
------
Extended
NOTE:
*
= Requires EEMM286.SYS /PA in the config.sys file.