Specifications

PSB No.: S-0062I
Page: 1 of 18
EQUITY II+ (12MHz)
VER PART # DESC TYPE LOC REASON
2.20
2.20
Y162802001
Y162803001
ADR-A2
ADR-B2
M27C128
M27C128
3B
4B
Fixed problems with serial port and
Microsoft Word, Intel InBoard 386
and CTRL key.
See ECN EQII+-001 (4/15/88).
3.00
3.00
Y162802002
Y162803002
ADR-A3
ADR-B3
M27C128
M27C128
3B
4B
To allow the use of the ADAPTEC
ACB-2322B ESDI controller.
See ECN EQII+-005 (2/6/91).
3.03
3.03
22011035
22011036
ODD303
EVEN303
M27C128
M27C128
SEE
NOTE
To resolve the problem that causes
the inability to format double density
diskettes in high density FDDs with
DOS 5.0 installed.
NOTE: For ADR-RM3 and ADR-
RM5 boards, ODD303 should be
placed in location 4B and EVEN303
in location 3B. For ADR-RM4
boards, ODD303 should be placed in
location 3B and EVEN303 in location
4B. See ECN EQII+-006 (4/2/93).
EQUITY IIe
VER PART # DESC TYPE LOC REASON
1.06
1.06
Y186807002
Y186806002
LNX-B03
LNX-A03
27C256
27C256
11E
14F
INITIAL RELEASE
1.07
1.07
Y186807003
Y186806003
LNX-B04
LNX-A04
27C256
27C256
11E
14F
Fixes problem with the SMD-449L
(1.44MB FDD) seek error and 720K
being accessed at 300KB.
1.13
1.13
Y186807004
Y186806004
CLNX-BO5
CLNX-AO5
27C256
27C256
11F
14E
To allow remote boot from DEPCA
network adapter. To allow the
expanded use of IDE hard drives (ST-
157A, Quantum,Maxtor, Rodime,
Western Digital). To allow the use of
Imprimis and Conner IDE drives in
two drive configurations. To allow
proper initialization when executing a
warm boot.
See ECN EQIIe-002 (2/6/91).