Specifications

EPSON
EPSON AMERICA INC.
SERVICE DEPARTMENT
PRODUCT
SUPPORT
BULLETIN
DATE:
6/8/87
NUMBER:
S-0011
SUBJECT: MS-DOS 3.2 SELECT COMMAND - MANUAL ERROR
A documentation error has been identified
in the MS-DOS version
3.2 manual which is supplied with the Equity It and III+, there is
an error in the documentation for the SELECT command. This error
also occurs in the HELP utility data file.
In the respective sections
on using
the Equity hard disk drive,
the syntax is given as:
SELECT C: 001 US
Also,
in the HELP utility, the format is given as:
SELECT [DOS source d:] [target d:] xxx yy
with the square
brackets
indicating optional
command line
parameters.
This turns out
not to
be the case;
both source and
destination drives are required parameters.
So -
there are two
solutions.
One is to use the "traditional"
method for logical formatting:
FORMAT C: /S/V
or use the correct SELECT syntax:
SELECT A: C: 001 US
Page 1 of 1