Specifications
NUMBER:
S-0061
PAGE: 11 of 13
Equity III+ (12 MHz)
ROM BIOS Version: 2.00
Memory: 640KB Base,
no extended/expanded
Clock Speeds: 6/8/12 MHz
Monitor: Monochrome
Video Adapter: Monochrome
DOS Version Tested: Epson MS-DOS 3.20
Mass Storage: 1 - 1.2MB FDD; 1
- 40MB HDD (Drive Type 45)
Hard Disk Controller: Western Digital WD1003-WAH
The Equity III+ (12 MHz) is approved as a Novell file server,
with the following limitations:
- The III+ (12 MHz) will not boot to DOS using the IBM CLUSTER
card.
- The III+ (12 MHz) will not function correctly at 12 MHz with
NetWare SFT Level II 2.1 Proteon or IBM Token Ring Network
workstation shell drivers. It will function correctly at 8 MHz
with these drivers.
- The III+ (12 MHz) will not function correctly at 12 MHz with
the Novell DCB; however,
it will function correctly at 8 MHz
with the DCB.
- The Novell NIC and INIC shells will often not function in
machines running faster than 8 MHz; because of that, the
III+ (12 MHz) will not run as a workstation at 12 MHz with
the INIC and INIC (non-interrupt) shell drivers. It will
function correctly at 8 MHz.
NetWare Utilities
COMPSURF:
INSTALL:
Passed
Passed
Configurations tested with Advanced NetWare 86 2.0a
NETWARE DRIVER CONFIGURATIONS
STATUS
GENBIOS (86)/IBM PC-NET:
Passed
86 SCSI DIB Configuration
Passed
IBM CLUSTER (86):
Failed
Comments:
The III+ (12 MHz) will not boot to DOS using the IBM
CLUSTER card.
Configurations tested with Advanced NetWare ND286 2.0a
NETWARE DRIVER CONFIGURATIONS
STATUS
GENBIOS
(ND286) :
Passed