Specifications

NUMBER: S-0061
PAGE:
5 of 13 1
Equity II+ (10 MHz)
ROM BIOS Version: 1.55
Memory: 640KB Base,
no extended/expanded
Clock Speeds: 8/10 MHz
Monitor:
Mono (non-Epson)
Video Adapter:
Mono (non-Epson)
DOS Version Tested: Epson MS-DOS 3.20
Mass Storage: 1 - 1.2MB FDD; 1 - 40MB HDD (Drive Type 17)
Hard Disk Controller: Western Digital WD1003-WAH
The Equity II+ (10 MHz) is approved as a Novell file server,
with the following limitations:
- The II+ does not function correctly as a file server with the
3Com 3C505(2012) network card.
- The II+ does not function as a file server at 10 MHz with the
Novell DCB; however,
it does function correctly with the DCB
at 8 MHz.
- The II+ does not function with the IBM CLUSTER board.
- The II+ does not function correctly with the GENBIOS (ND286)
and GENBIOS (86) drivers.
- The Novell NIC and INIC shells will often not function in
machines running faster than 8 MHz; because of that, the II+
will not run as a workstation at 10 MHz with the INIC
(non-interrupt) shell driver.
It will function correctly at
8 MHz.
- The typematic feature of the II+ is slow when running Advanced
NetWare ND286; however,
all other keyboard input functions
correctly.
NetWare Utilities
COMPSURF: Passed
INSTALL:
Passed
Configurations tested with Advanced NetWare 86 2.0a
NETWARE DRIVER CONFIGURATIONS
STATUS
SMC/PD Arcnet:
Passed
GENBIOS (86)/IBM PC-NET:
Cold Boot:
Key Card (Critical!):
Printer:
86 Non-dedicated option:
86 SCSI DIB Configuration:
Failed
Passed
Passed
Passed
Passed
Passed
Comments:
The II+ (10 MHz) will not function correctly with
GENBIOS (ND286) and GENBIOS (86) drivers.