Installation guide

Section F continued
xx: Expansion Unit Error 8 IPL Initial Program Load:
Graphic Printer
-1400---
0154
Detects absence of 10MB drive C
Error Reading Track 0:
Not formatted.
Read Error:
Check ground. controller or disc.
Format taking too long to format:
'Indicated data cable may be connected wrong. (drive C goes to
controller J 4 connector)
Also check interleave for a value of 3 or 4 (AT).
Only change to an interleave IR 4 if 3 causes format to be too slow. It
is not possible to use faster (2 or 1).
mega! Drive Specified:
Indicates that the primary format or "FDISK" was not performed
correctly. Recheck your parameter values and redo the format.
48