Installation guide

Section F
This ection will cover system errors and possible solutions.
Hard File Adaptor Errors:
1700 Hard ftle/adaptortesf-passed-(no-errofr
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
Drive not ready (also a post error)
Non
fatal drive/adaptor test failed (also a post error)
Check that drive has power and that spindle motor is spinning.
If motor is not spinning, check that 12 vdc comes up within
one second. Some large Switching power supplies require
more time to charge the large capacitors which may cause
system to time out.
Hard file/adaptor error
Tim~ out - is drive powered up and spinning?
Are cables correct?
Hard flle/drive error
Seek failed - is drive low level formatted?
ECC error - probably controller related
Check drive select
Hard file or adaptor error
Controller failed
No recm:d found
Write fault
'Are two heads selected?
Are voltages ok?
See product manual for what causes write fault
Track 0 error
Is drive formatted?
Bad select error
Is drive formatted?
BadECC
Check controller
Read buffer override
Check controller and interleave
46