Installation guide

CHANGED OR ADDED
5. PRESS ~ TO RETURN TO FDISK OPTIONS
P.
Screen will now display:
1. FDISK OPTIONS
2. PRESS ESC TO RETURN TO DOS
_Q~ S~reen will now display: __
I. SYSTEM WILL NOW RESTARr
2. INSERT DOS DISKETIE IN DRIVE A: PRESS ANY
KEY WHEN READY ....
NOTE: System will now reboot.
R A: Enter FORMAT C: IS QR
1. WARNING. ALL DATA ON NON-REMOVABLE DISK
DRIVE C: WILL BE LOST! PROCEED WITH FORMAT
(YIN)?
A EnterYCR
NOTE: D: Partition is now being prepared. This should take
approximately 4 - 5 minutes.
S. Screen will now display:
1. FORMAT COMPLETE
2. SYSTEM TRANSFERRED
3. CAPACl1Y OF C: PARrITION
4. A:. ENTER FORMAT D: CR
5. WARNING. ALL DATA ON NON-REMOVABLE DISK
DRIVE D: WILL BE LOST! PROCEED WITH FORMAT
(Y IN)?
A EnterYCR
NOTE: D: Partition is now being prepared. This should take
approximately 2 - 3 minutes.
T. Screen will now display:
1. FORMAT COMPLETE
2. CAPACl1Y OF D: PARTITION
Your hard disk drive is now ready to be used.
III. FDISK and DOS Format (if you answered "Y" to virtually
configuring)
A Remove MS DOS 3.3 utility diskette from A: drive
B. Insert MS DOS 3.3 diskette into A: drive
C. Press any key to reboot system
D. A: Enter FDISK CR
E. Screen will now display:
1. FDISK OPTIONS
2. CURRENT FIXED DISK DRIVE:' 1
3. CHOOSE ONE OF THE FOLLOWING:
41