Installation guide

1. CREATE PRIMARY DOS PARTITION
2. CURRENT FIXED DISK DRIVE: 1
3. DO YOU WISH TO USE THE MAXIMUM SIZE FOR A
DOS PARTITION AND MAKE THE DOS PARrmON
ACTIVE (YIN) .... ?
--A ENTER- al-iQEl
H. Screen will now display:
1. SYSTEM WILL NOW RESTARr
2. INSERr DOS DISKEIIE IN DRIVE A: PRESS ANY
KEY WHEN READY ...
NOTE: System will now reboot.
1. A:. Enter FDISK CR
J. Screen will now display:
1. FDISK OPTIONS
2. CURRENT FIXED DISK DRIVE: 1
3. ·CHOOSE ONE OF THE FOLLOWING:
4. ENTER CHOICE: (1) CR (CREATE DOS PARTITION)
K. Screen will now display:
1. CREATE DOS PARTITION
2. CURRENT FIXED DISK DRIVE: 1
3. ENTER CHOICE: (2) CR (CREATE EXTENDED DOS
PARTITION)
L. Screen will now display:
1. CREATE EXTENDED DOS PARrIll0N
2. CURRENT FIXED DISK DRIVE: 1
3. PARTITION STATUS __ _
4, TOTAL DISK SPACE IS # CYLINDERS. MAXIMUM
SPACE AVAILABLE FOR PARTmON IS #
CYLINDERS.
5. ENTER PARTITION SIZE ... (#CYLS) CR
M. Screen will now display:
1. CREATE EXTENDED DOS PARrITION
2. CURRENT FIXED DISK DRIVE: 1
3. PARrITION STATUS __ _
4. EXTENDED DOS PARTITION CREATED
5. PRESS ESC TO RETURN TO FDISK OPTIONS
N. Screen will now display:
1. CREATE LOGICAL DOS DRIVE(S)
2. NO LOGICAL DRIVES DEFINED
3. TOTAL PARrITION SIZE IS # CYLINDERS
4. MAXIMUM SPACE AVAILABLE FOR LOGICAL DRIVE
IS # CYLINDERS.
5. ENTER LOGICAL DRIVE SIZE ... (# CYLS) CR
O. Screen will now display:
1. CREATE LOGICAL DOS DRIVE(S)
2. DRV START END SIZE
D: __ _
3. ALL AVAILABLE SPACE IN THE. EXTENDED DOS
PARrITION IS ASSIGNED TO LOGICAL DRIVES
4. LOGICAL DOS DRIVE CREATED, DRIVE LEI IERS
40