Installation guide

·Format Utility·
Cylinders (1-2048): 809 (3650/3675), 1024 (3053).
lj:eads (1-16): 6 (3650/3675),.5 (3Q53t
Step Rate (Micro sec):
(59 10
9
20
9
30
9
40
9
50
9
60, 70)
Step Rate (Micro sec): 10
Set reduced write current at cylinder: Press <RETURN> for None
Set write precompensatlon at cylinder: 128 (3650/3675), 512 (3053)
Split into 2 logical units (Y IN): Type Y
Drive
will split into 2.
Enter drive defect table? (YIN) Y
(Type
<ESCAPE> to end input)
Line Cylinder Head
1 Is above information correct? (Y IN)
Enter drive defect table (Y IN) N
Ready to ERASE entire disk? (YIN): Type Y
Formatting hard disk no. 1
Cyl
Head
Cyl 808 Head 5
Format complete.
Insert DOS diskette in drive A:
Proceed to FDISK and. FORMAT.
Enter any key. System will restart!
Load and execute DOS FDISK utility for drive C and D.
Load and execute DOS FORMAT utility for drive C and D.
Reference
DOS Manual for questions regarding FDISK and FORMA utilities.
If further technical assistance is required. contact MiniScribe Technical
Support at 800-356-5333.
28