Installation guide

FORMATTING AND PARTITIONING THE
MINISCRIBE 3650. 3675. OR 3053 WITH DTC
MODEL 5150 CR. CIt AND CS CONTROLLERS
Turn system power on.
The following prompts will appear on the screen: please respond as
indicated.
*Controller board configuration*
Hards Disk 1: Configuration parameters not found.
To install configuration parameters. run DEBUG from floppy disk "A" as
follows:
A>debug
g=CBOO: 5
Insert DOS diskette in drive "A"
System will boot! Please wait. . . .
*Format Utility*
Drive no. (1-2): 1
Interleave (2-9): 3
Drive
Table:
O. ST-225/Tandon-262
1. ST-403B.
2. MiniScribe-3425 /Microscience-725.
3. ST-212/ST-412.
4. Priam-V150 ..
5. Priam-V170.
6. ST-425.
7. Tandon-362/ST-13B.
B. ST-4051/Tandon-755.
9. ST-251.
10. ST-213/MiniScrtbe-3012/3212/Syquest-312.
11. Tandon-703.
12. Maxtor-10B5.
13. ST-4096.
14. Oki-540.
15. Free Format
Table no: 15
25