Installation guide

OUTER BOX
17 3/8 x 16 1/16 x 9 1/2
Figure 1
MINISCRIBE
DRIVE
SLING
Single Pack Shipping Container A
SINGLE PACK B
Retain the packing materials for reuse. Refer to Figure 2 for the following
steps:
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Inspect the shipping container for evidence of damage in transit.
If damage is evident. notify the carrier immediately.
Ground out work area and operator to eliminate electrostatic
dischar~e.
Open the outer carton by carefully cutting the tape on the top of
the carton.
Lift the inner carton out of the outer carton and remove the end
foam cushions.
Open the inner carton by carefully cutting the tape on the top of
the carton.
16