Specifications

Adaptec Fibre Card 9210LP User’s Reference

Using FCSelect and Disk

Utilities

The Adaptec Fibre Card 9210LP has the onboard FCSelect

configuration utility which allows you to change Adaptec Fibre

Card 9210LP options without opening the computer chassis or

handling the card. FCSelect also includes disk utilities to list the

devices connected to the Adaptec Fibre Card 9210LP.

The following table lists the available and default settings for each

FCSelect configuration option.

Starting FCSelect

1 Turn ON or restart your system.

During the startup process, pay careful attention to the

messages that appear on your screen.

2 When the following message appears on your screen, press the

Ctrl-A keys simultaneously (this message appears for only a

few seconds):

Press <Ctrl><A> for FCSelect (TM) Utility!

3 From the menu that appears, use the arrow keys to move the

cursor to the option you want to select, (Configure/View FC

Card Settings, or run FC Disk Utilities), then press Enter.

Note: You can return to the previous menu at any time by

pressing Esc.

FCSelect Configuration Options Available Settings Default Setting

FC Card INT 13h support Enabled/Disabled Disabled

FC Card Hard AL_PA All valid AL_PA IDs 0x01

Device Scanning Backward/Forward Backward

Host Adapter Speed Auto Negotiation

2 Gigabit

1 Gigabit 1 Gigabit