User`s guide

6-10
Managing Disk Drives and Enclosures
To change the SEP settings:
1 From the System Menu, select Configuration Menu and press
Enter.
The Configuration menu appears.
2 Select SEP Configuration and press Enter.
The SEP Configuration menu appears.
3 Select SEP Settings and press Enter.
The Poll Rate prompt appears.
4 Type the poll rate you want, in seconds, and press Enter.
The Temperature menu appears. The current setting is marked
with an * next to it.
5 Select the option you want and press Enter.
The Slot Flags menu appears. The current setting is marked with
an * next to it.
6 Select whether you want the SEP to send slot status updates to
the controller and press Enter.
The Global Flags menu appears. The current setting is marked
with an * next to it.
7 Select whether you want the SEP to send RAID appliance status
updates to the controller and press Enter.
The system confirms that you want to make the changes.
8 Select Yes and press Enter to make the changes.