User`s guide

6-2
Managing Disk Drives and Enclosures
Displaying All Disk Drives
You can display this information for all disk drives connected to
the controller:
■ Channel number
■ SCSI target ID number
■ Size
■ Manufacturer
■ Model number
■ Drive firmware revision
If any of the disk drives are members of an array, the following
information may also display:
■ Utility running—Expand, Verify, and so on.
■ Array number—The array’s sequential position in the
controller’s array list.
■ Member number—The disk drive’s sequential position in the
array.
Disk drives that are not members of any array are listed as
Available.
Disk drives that contain leftover metadata from a previous array
are listed as Leftover, which happens if disk drives are pulled and
reinserted. To clear leftover metadata, use the Clear Metadata
Function. See Clearing Metadata from a Disk Drive on page 6-3
To display all disk drives:
1 From the System Menu, select Display Drives and press Enter.
The Display Drives window appears.
2 Press Esc to return to the System Menu.