User`s guide

5-11
Configuring the Controller
4 Select the option you want and press Enter.
The system confirms that you want to make the change.
5 Select Yes and press Enter to make the change.
The system confirms that the change is made.
6 Press Esc to return to the Option Configuration menu.
Note: You must reboot the controller for the change to take
effect. See Rebooting the Controller on page 5-2.
Managing the Other Controller
If you are using active-active mode, you can
■ Display information about the other controller. See page 5-11.
■ Shut down the other controller. See page 5-12.
■ Shut down both controllers. See page 5-12.
■ Kill the other controller. See page 5-13.
■ Unkill the other controller. See page 5-13.
You can also change the ownership of an array between
controllers. See Changing Array Ownership on page 2-18.
Displaying Information about the Other Controller
You can view information about the other controller. If the other
controller is up, its current status is shown; if the other controller is
down, its last known state is shown. If the other controller never
communicated with the local controller since boot up, most fields
will display Unknown or something similar.
To display information about the other controller:
1 From the System Menu, select Other Controller Menu and
press Enter.
The Other Controller menu is only available if the system is
configured to run in active-active mode.
The Other Controller menu appears.