User`s guide

3-6
Monitoring System Status
To display hardware information only:
1 From the System Menu, select Utilities Menu and press Enter.
The Utilities menu appears.
2 Select Hardware Information and press Enter.
The Hardware Information window appears.
3 Press Esc to return to the Utilities menu.
To display hardware and configuration information:
1 From anywhere in Adaptec Disk Array Administrator, press
CTRL-E.
The Event Log screen appears.
2 Press CTRL-E again.
The HW Info window appears.
3 Press CTRL-E again.
The CFG Info window appears.
You can press Esc to return to the previous window.
4 Press CTRL-E or Esc to return to where you started from.
SEP Poll Rate Number of seconds as set in
Adaptec Disk Array
Administrator.
Temperature ON or OFF as set in Adaptec
Disk Array Administrator.
Slot Flags ON or OFF as set in Adaptec
Disk Array Administrator.
Global Flags ON or OFF as set in Adaptec
Disk Array Administrator.
Table 3-1 Configuration Information (Continued)
Group Field What Displays