User`s guide

2-12
Creating and Managing Arrays and Partitions
To view the status of an array:
1 From the System Menu, select Array Menu and press Enter.
The Select Array menu appears.
2 Select the array you want and press Enter.
That array’s Array menu appears.
3 Select Array Status and press Enter.
A window appears showing the status of the array you selected.
4 Press Esc to return to the Array menu.
Viewing Disk Drive Status
You can view the following information for the disk drives in an
array:
■ Drive number—The disk drive’s sequential position in the
controller’s disk drive list.
■ Drive status—Whether the disk drive is up or down.
■ Channel number—Back-end disk bus number.
■ Target ID—The number assigned to each disk drive attached to
a SCSI channel (also known as SCSI ID).
■ Size—Size of the disk drive in MB.
■ Status—If part of an array, this displays the array name and
member number. If a spare, this displays the type of spare. If
unused, this displays Available. If the disk drive was part of an
array that no longer exists, this displays Leftover.
Note: If a disk drive has failed or malfunctioned, it may not
be listed.
To view the status of a disk drive:
1 From the System Menu, select Array Menu and press Enter.
The Select Array menu appears.
2 Select the array you want and press Enter.
That array’s Array menu appears.