Datasheet

B-20
DOS Utilities
Playback Mode
Playback mode enables you to create one or more arrays based on
the properties defined in a script file. It also enables you to
configure certain properties for each channel on the controller.
When you create an array, you can specify any of the array
properties listed in the table below.
Property Description
Type Supported array types are:
■ Volu me
■ RAID 0
■ RAID 1
■ RAID 5
■ RAID 10
Size Size of the array to be created. Size can be specified
in megabyte (MB), gigabyte (GB), or terabyte (TB)
units, or
Maximum to specify the maximum size
based on the given type and disks.
Label Alphanumeric string uniquely identifying the array.
StripeSize Size (in MB) of contiguous data distributed across a
striped array (RAID 0, RAID 5
, or RAID 10)
Cache settings You can specify the following cache values:
■ ReadCache— Yes (enable), or No (disable)
■ WriteCache— Yes (enable), or No (disable)
Drives Disk drives to use in creating the array. Drives are
identified by their channel number, ID number, and
LUN.
HotspareDrives Disk drives to assign as spare drives for this array.
Drives are identified by their channel number, ID
number, and LUN.