Datasheet

B-4

DOS Utilities

Running the AFU

You can run the AFU from its graphical user interface (GUI) or

from the command line.

Accessing the AFU from the GUI

To access the AFU:

1 At the DOS command prompt (typically

A:\>), type

AFU

with no

arguments.

The main menu to the AFU is displayed.

2 Select Select Controllers and select the controllers to be flashed.

3 Select Select an Operation.

4 Select any available AFU function and follow the on-screen

instructions.

Accessing the AFU from the Command Line

At the DOS command prompt (typically A:\>), type AFU followed

by a command and any optional switches. The AFU processes the

command, prompts you to insert additional floppy disks as

needed, exits, and reports success or an error message code.

The syntax of the AFU command line is as follows:

AFU <Command> [/C<Controller ID>] [/D <UFI File Path>] [/?]

where

is one of the following AFU commands:

■ HELP—Displays AFU help text.

■ LIST—Lists the AFU-supported controllers installed on this

system.

■ SAVE—Saves the contents of a controller’s flash to the specified

UFI file.

■ UPDATE—Updates a controller’s flash from the data in the

specified UFI file.

■ VERIFY—Compare the controller’s current flash to the

specified UFI file.

■ VERSION—Displays the controller’s current flash version

information.