Datasheet

A-5
Adaptec RAID Configuration Utility
6 Select Yes to delete the array or No to return to the previous
menu. At the Array Properties dialog box, select Delete again
and then press Enter.
7 Press Esc to return to the previous menu.
Managing Failover Drive Assignments
To assign a hot spare drive to an array:
1 Select Manage Arrays from the Main menu.
2 From the List of Arrays dialog box, select the array to which
you want to assign a hot spare, and then press Ctrl+S. The
Hotspare Management for Array dialog box is displayed, which
shows the drives that can be assigned as hot spare drives.
3 Select a drive and then press Insert to assign the drive as a hot
spare. The specified drive is displayed in the Assigned
Hotspares drives list.
4 Press Enter to save the hot spare drive assignment. the
following message is displayed:
Have you finished managing Hotspare drives?
5 Press Y (for yes) to return to the Main menu.
To remove an assigned hot spare drive from an array:
1 Select Manage Arrays from the Main menu.
2 From the List of Arrays dialog box, select the array from which
you want to remove the assigned hot spare drive and press
Ctrl+S. The Hotspare Management for Array dialog box is
displayed, which shows a list of drives that can be assigned as
hot spare drives and a list of drives that are assigned as hot
spare drives.
3 From the Assigned Hotspares drives list, select the drive to be
removed and then press Delete. The specified drive is
displayed in the Select Hotspares drives list.
4 Press Enter to save the removed hot spare drive assignment. the
following message is displayed:
Have you finished managing Hotspare drives?
5 Press Y (for yes) to return to the Main menu.