Datasheet

A-1
A
Adaptec RAID
Configuration Utility
In this Appendix...
The Adaptec RAID Configuration (ARC) utility is an embedded
BIOS utility that includes:
■ Array Configuration Utility (ACU) —Used to create, configure,
and manage arrays. Also used to initialize and rescan drives.
(Also available as a stand-alone DOS utility as described in
Using
the Array Configuration Utility (ACU)
on page B-11 . )
■ SATASelect—Used to change device and controller settings,
■ Disk Utilities—Used to format or verify media.
To run the ARC utility, press Ctrl+A when prompted by the
following message during system startup:
Press <Ctrl><A> for Adaptec RAID Configuration Utility
Using the Array Configuration Utility A-2
Using SATASelect A-9
Using the Disk Utilities A-11
Viewing the Event Log A-12