Datasheet

1-5
Introduction
Controller Features
The Adaptec 2410SA controller supports four Serial ATA drives.
The controller offers the features and performance ideal for high-
end workstations and entry-level servers.
■ Conforms with PCI Local Bus Specification, Revision 2.2
■ 64-bit, 66-MHz PCI interface compatible with 32-bit/33-MHz
PCI slots
■ 64 MB of on-board RAM
■ Low-profile, MD2 form factor ideal for 1U/2U servers
■ Supports the Serial ATA Specification, version 1.0, with
additional Serial ATA II support for enclosure management and
enhanced I/O drivers for backplane support
■ RAID levels 0, 1, 5, 10 and simple volume (JBOD)
■ Operating system independent configuration and RAID
creation using the Adaptec RAID Configuration (ARC) utility
■ Flash ROM for easy upgrades of controller BIOS and ARC
■ Event logging and broadcasting, including messaging for
alphanumeric pagers
■ Browser-Based Management Software—Adaptec Storage
Manager  – Browser Edition provides centralized management
across all Adaptec host-based RAID products. This application
allows system administrators to remotely manage, monitor, and
configure RAID subsystems through password-protected Web
access.
Adaptec’s Advanced RAID Technology Features
With Advanced features, you can:
■ Optimized Disk Utilization —Enables you to use the full
capacity of all your drives, even if drive sizes vary.
■ Online Capacity Expansion —Allows you to expand the capacity
of your RAID during system operation.
■ Online RAID Level Migration —Lets you change RAID levels
without rebuilding your array from scratch.