Datasheet

C-10
Command Line Interface (CLI)
Example of controller details :
AAC0> controller details
Executing: controller details
Controller Information
----------------------
Remote Computer: .
Device Name: AAC0
Controller Type: Adaptec xxxxxx
Access Mode: READ-WRITE
Controller Serial Number: Last Six Digits = 8A277A
Number of Buses: 2
Devices per Bus: 15
Controller CPU: i960
Controller CPU Speed: 100 Mhz
Controller Memory: 64 Mbytes
Battery State: Not Present
Component Revisions
----------------------
CLI: 3.0-0 (Build #5478)
API: 3.0-0 (Build #5478)
Miniport Driver: 3.0-0 (Build #5478)
Controller Software: 3.0-0 (Build #5478)
Controller BIOS: 3.0-0 (Build #5478)
Controller Firmware: (Build #5478)
Controller Hardware: 3.3
Before opening a controller, you may want to use the controller
list command to display a list of controllers. In the following
example, the Adapter Name column indicates that AAC0 is the
name of the controller installed on the computer. The example also
indicates the controller’s path (
\\.\).
CLI> controller list
Executing: controller list
Adapter Name Adapter Type Availability
------------ ------------ ------------
\\.\AAC0 Adaptec xxxxx read/write