Manualshelf

User`s guide

ManualsBrandsAdaptec ManualsComputer equipment4000SAS
12345678910
Adaptec SAS RAID Confi guration and the Windows OS Installation Instructions
7
Adding a Bootable Array
To make an array bootable:
1. From the Main menu, select Confi gure Boot Unit and press <Enter>. The following
screen displays.
2. From the "Select Drive to Create Boot Unit" list, select the drive you wish to con-
fi gure as a bootable unit and press <Insert>. The Drive you have selected appears
in the right window as shown in the screen below:
3. Select the disk drive you wish to confi gure as a bootable drive from the "Selected
Drives" List (in the right window) and press <Enter>. The next screen appears.