User`s guide

16
Adaptec SAS RAID Setup Guidelines
To Set Physical Confi guration:
1. Turn on your computer and press <Ctrl> <A> when prompted to access the Adaptec
RAID Confi guration Utility.
2. Use the arrow keys to select "SerialSelect Utility" and press <Enter> to access the
Physical Confi guration submenu as shown below:
3. Select "Physical Confi guration" and press <Enter> to access SAS Device Confi gu-
ration submenu as shown below:
4. Use the arrow keys to select an item. Then, press <Enter> and the arrow keys
to confi gure the item selected.
5. To load default settings, press <F6>.
6. Press <Esc> to return to the previous menu and to exit the utility.