User`s guide

Adaptec SAS RAID Conﬁ guration and the Windows OS Installation Instructions

Rebuilding Arrays

Note 1: You can use Rebuilding on Fault Tolerant array (RAID 1) only.

If an array Build or Initialization process is interrupted or critical with one member

missing, you must perform a Rebuild to get the array to the Optimal status. For a

critical array Rebuild operation, the optimal drive is the source drive.

Note 2: If you do not have a spare array, and your hard disk drive fails, you need to

create a spare before you can rebuild an array.

To Rebuild an array:

1 From the Main Menu, select Manage Arrays (as shown in the screen below). From

the List of Arrays, select the array you want to rebuild.

2 Press the <Ctrl> <R> keys for Array Rebuild.