Installation guide

U41255-J-Z156-1-76 5
Overview Adaptec 3200S RAID Controller
Adaptec 3200S RAID Controller, Overview
The 3200S RAID controller provides two Ultra 160 SCSI channels for the
connection of up to 30 individual drives into an array. For clustering operation,
up to 7 drives may be connected to each channel. 3200S BIOS configuration
utility may be used to configure the array and must be used to set the system
into cluster mode when it is configured.
A200S 2 Ultra 160 SCSI channels, 32/64 MB Cache, BBU optional
Up to 7 drives per channel in cluster configuration
60 logical drives per controller
On board i960 processor
Up to 64 megabytes of cache memory (16 megabytes used by processor)
64bit/66MHz PCI
PCI 2.2 Compliant
Flash-ROM based RAID Management Utilities (SMOR)
Auto Resume during Array Rebuild
Adaptec 3200S (without BBM)