Installation guide

2 U41255-J-Z156-1-76
Contents of this Guide Introduction
Contents of this Guide
This guide contains the following chapters:
● Introduction – this chapter
● Overview-Clustering with 3200S RAID Controllers– Provides a quick
rundown of the steps needed for installing an RAID system into a cluster
server, and highlights of the hardware and software available for this
purpose at Fujitsu Siemens Computers.
● System Requirements and Configurations – presents a list of system
requirements for the installation.
● Installation – provides details for configuring the 3200S RAID controller
cards and cabling the PRIMERGY S30 Storage Subsystem to the controller
cards once they are installed in the PRIMERGY servers.
● BIOS Configuration Utility – provides details for configuring the 3200S RAID
adapters for cluster operation after the RAID array has been created and
built.
● Driver Installation – presents a short description of installing the required
drivers needed by the controller cards.
● Cluster Service Installation – presents a short description of the sequence
of steps necessary to add the RAID components to the cluster.
● Installing the RAID Manager Application – provides a short description of
installing Storage Manager.
● For More Information – provides help in finding other documentation that
may be needed if the user is not familiar with parts of this installation
process.