Installation guide

24 U41255-J-Z156-1-76
Driver Installation Installation
Driver Installation
To install the driver for the 3200S RAID controller you can either use the
PRIMERGY ServerStart CD or a driver floppy disk.
Installation with ServerStart CD
Ê Put the ServerStart CD into the CD-ROM drive
Ê Follow the instructions of the guided ServerStart installation process
Installation with driver floppy disk
Ê Create a driver floppy disk from the disk image on the PRIMERGY Server-
Start CD.
When you start Windows 2000, the Found New Hardware Wizard
searches for a SCSI/ATA RAID Controller.
Ê Insert the driver floppy disk into the floppy disk drive. Select the floppy disk
as the source, then click Next.
Ê Click Next in the next two windows that appear.
Ê Follow the on-screen instructions to complete the 3200S RAID controller
installation.
Cluster Service Installation
Windows 2000
Install Windows 2000 Advanced Server.
Under Win2K, as in NT4, both nodes must either be domain controllers or
member servers. The installer must make this determination prior to
commencing the set up. Microsoft may cause this consideration to change in
future versions.
ATTENTION!
Have Node 2 powered off while booting Node 1.
i
!