Installation guide

22 U41255-J-Z156-1-76

BIOS Configuration Utility Installation

Initiating ID Settings

Ê From the above opening screen, click the controller being configured in the

left frame.

Ê Click the bus being configured.

Ê In the right frame, click the ID# shown (it should be 7). Press the down-arrow

key to make the ID# = 6.

Because the storage subsystem and controllers are on a common

SCSI bus, both controllers must have a unique SCSI ID.

To ensure they receive the highest priority for SCSI bus access, use

SCSI ID 7 (the default) for one controller (Node 1) and SCSI ID 6 for

the other controller (Node 2).

You can use SMOR to change the SCSI ID assigned to a controller.

Ê Click File. A Confirmation window will appear. Click Yes.

Ê Click Exit, then OK. The system will restart.

Enabling Cluster Mode

Ê Enable Microsoft Cluster Server support on both 3200S RAID controllers.

This feature is activated through the Storage Manager on ROM utility

by the Cluster Server Enable option in the HBA Configuration tab

view. See the Storage Management Software User’s Manual for

additional information.

Ê From the initial SMOR screen above, click the controller being configured in

the left frame.

Ê Press ALT+C to change from the HBA Information tab view to the Configu-

ration tab view.