Technical data

1.4 Edition overview
FE BE SE PE EE
Supported standards
VSITR
BSI-GSB
ACSI 33
AFSSI 5020
AR380-19
DoD5200.28M
DoD5220.22M
NCSC-TG-025
HMG IS5 (Baseline)
HMG IS5 (Enhanced)
GOST P50739-95
RCMP TSSIT OPS-II
Bruce Schneier's method
Roy Pfitzner's method
Peter Gutmann's method
Special modes
6)
Single partition deletion
SmartDefectSkip
MultiDelete (4x, 8x, 16x)
Deletion speed
7)
up to 90 MB/s and more
up to 1000 MB/s and more
License scope
8)
private use
professionals/corporations
technician license
1)
SATA hard disks: They have to be connected to one of the SATA controllers supported by HDShredder and the
controller has to be configured accordingly (3.3.2 SATA/SATA-II controllers).
2)
Hard disks above 2048 GB: HDShredder supports hard disks larger than 2048 GB (2 Terabytes).
3)
CompactFlash via IDE: HDShredder supports CF media in TrueIDE mode.
4)
SCSI hard disks: require one of the SCSI host adapters supported by HDShredder (3.4 SCSI).
5)
Deletion modes: You find further information regarding the different modes in chapter 6.5 Deletion methods.
quick & easy: simple quick deletion, no further knowledge required.
automatic: choose deletion mode according to required security level, no special knowledge required.
standardized: deletion according to one of 15 international security standards.
user defined: specify your own deletion patterns with up to 199 deletion cycles (6.5.3 Custom).
6)
Special modes: HDShredder knows special working modes to increase deletion speed. Further information about
these modes is to be found in chapter 5.9 Selecting the options.
7)
Deletion speed: Due to technical differences, there is an upper limit for the actually achievable deletion speed:
> 90 MB/sec: up to 133 MB/s with Ultra-DMA mode 6, up to 300 MB/sec with SATA II.
> 1000 MB/sec: Mass-deletion of up to 16 drives at a time.
8)
License scope: see also chapter 8.1 Terms of license.
8