Specifications
Table Of Contents
- IBM PC Server and Novell NetWare Integration Guide
- Abstract
- Contents
- Figures
- Tables
- Special Notices
- Preface
- Chapter 1. IBM PC Server Technologies
- Processors
- Clock Rate
- External Interfaces
- Processor Types
- Multiprocessing
- Memory
- Caches
- Memory Interleaving
- Dual Path Buses
- SynchroStream Technology
- Memory Error Detection and Correction
- Standard (Parity) Memory
- Error Correcting Code (ECC)
- Error Correcting Code- Parity Memory (ECC- P)
- ECC on SIMMs (EOS) Memory
- Performance Impact
- Memory Options and Speed
- Bus Architectures
- ISA Bus
- EISA Bus
- Micro Channel Bus
- PCI Bus
- Disk Subsystem
- Hard Disk Interfaces
- SCSI Technology
- SCSI Adapters
- Hard Disk Drives
- RAID Technology
- RAID Classifications
- Recommendations
- LAN Subsystem
- Shared RAM Adapters
- Bus Master Adapters
- PeerMaster Technology
- Security Features
- Tamper- Evident Cover
- Secure I/ O Cables
- Passwords
- Secure Removable Media
- Selectable Drive Startup
- Unattended Start Mode
- Systems Management
- DMI
- SNMP
- NetFinity
- SystemView
- Fault Tolerance
- NetWare SFT III
- Uninterruptible Power Supply (UPS)
- APC PowerChute
- Chapter 2. IBM PC Server Family Overview
- Chapter 3. Hardware Configuration
- The Setup Program
- Main Menu
- Advanced Menu
- Security
- EISA Configuration Utility
- SCSI Select Utility Program
- System Programs
- Starting From the System Partition
- Starting From the Reference Diskette
- Main Menu Options
- Backup/ Restore System Programs Menu
- Set Configuration Menu
- Set Features Menu
- Test the Computer
- More Utilities Menu
- Advanced Diagnostic Program
- RAID Controller Utility
- Drive Information
- Formatting the Disks
- Defining a Hot- Spare Disk
- Creating a Disk Array
- Defining Logical Drives
- Setting the Write Policy
- Initializing the Array
- Backup/ Restoring the Configuration
- Chapter 4. Novell NetWare Installation
- ServerGuide Overview
- Starting ServerGuide
- Installing NetWare 4.1 with ServerGuide
- Installing NetWare 3.12 with Diskettes
- Hardware Requirements
- Software Requirements
- Information Requested at Time of Installation
- Installation Files
- Installation Procedure
- Installing NetWare 4.1 with the Original CD- ROM
- Hardware Requirements
- Software Requirements
- Installation Procedure
- NetFinity Services for NetWare
- System Requirements
- Installing NetFinity Services for NetWare
- The RAID Administration for NetWare Utility
- Installing the Utility
- Hard Disk Failure Simulation
- Simulating with a Hot Spare Drive
- Simulating without a Hot Spare Drive
- Chapter 5. Performance Tuning
- Appendix A. EISA Configuration File
- Appendix B. Hardware Compatibility, Device Driver, and Software Patch Information
- Appendix C. Configuring DOS CD-ROM Support
- List of Abbreviations
- Index
- Special Characters C
- Numerics
- A
- B
- D
- E
- F
- H
- M
- I
- N
- K
- L
- O
- P
- S
- Q
- R
- T
- U
- V
- W
- Z
- ITSO Technical Bulletin Evaluation RED000
The following lines need to be added to AUTOEXEC.NCF:
SEARCH ADD SYS:NETFIN\
LOAD NETFBASE
If you choose to update AUTOEXEC.NCF,
AUTOEXEC.NCF will be backed up to AUTOEXEC.RPS.
Otherwise, additions will be saved to the file
AUTOEXEC.NEW in the path SYS:NETFIN\.
Update AUTOEXEC.NCF(Enter Y or N)?
SYS:NETFIN\ is the default target path or the new path you entered during
the installation procedure.
17. Type
Y if you want NetFinity Services for NetWare to start automatically when
the server is started. Press Enter.
18. Press any key to close the screen.
The NetFinity Services for NetWare installation is now complete.
19. Type
DOWN at the colon prompt.
20. Type
EXIT at the colon prompt to return to DOS.
21. Reboot the server to start NetFinity Services for NetWare.
4.6.2.2 Installing with Diskettes from a Workstation
To install NetFinity Services for NetWare from a workstation, the workstation
must have NetFinity Manager for OS/2, NetFinity Services for OS/2, or NetFinity
Services for Windows installed.
To install NetFinity Services for NetWare from a workstation:
1. Log on to the NetWare server from the workstation.
2. Map a drive letter to a directory on the server where NetFinity Services for
NetWare will be installed.
3. Insert NetFinity Services for NetWare Diskette #1 into diskette drive.
4. Start the NetFinity installation program.
If the workstation is running OS/2:
a. Start an OS/2 full screen or OS/2 windows session.
b. Type
A:INSTALL and then press Enter.
If the workstation is running windows:
a. Select File from the program manager menu bar.
b. Select Run... from the File pull-down menu.
c. Type
A:NETFINS in the command line field and then select OK.
A window like the one in Figure 107 will appear.
Figure 107. NetFinity Installation
Chapter 4. Novell NetWare Installation 147