Specifications

6. The installation program will prompt you to insert NetFinity Services for
NetWare, Diskette #2.
7. Configure the Network Driver.
After the program files have been copied onto your NetWare server, the
following screen appears. Please note that in this example, the name of the
NetWare server is PCSERVER.
NetFinity Network Driver Configuration
1: System Name : PCSERVER
2: Network Driver : Novell IPX
3: Driver Enabled : TRUE
4: System Keywords :
<not used>
<not used>
<not used>
<not used>
<not used>
<not used>
<not used>
<not used>
<not used>
5: Network Time-out: 15
6: Options
7: Save
8: Reset
9: Exit
Select an Entry (1-9) ->
Figure 106. NetFinity Network Driver Configuration
8. Enter a System Name.
a. Type
1 and then press Enter.
The following message appears on the display:
Type a name for your server->
b. Type a name for your server, and then press Enter.
9. Select a Network Driver.
a. Type
2 and then press Enter.
A list of network communications drivers supported by your server
appears, followed by this message:
Select a driver number->
b. Type the number of a network driver and then press Enter.
10. Enable the Network Driver.
a. Type
3 and then press Enter.
The following message appears:
Set the driver status(1=False, 2=True)->
b. Type 2 and then press Enter to enable the driver.
Chapter 4. Novell NetWare Installation 145