Specifications

72 Optimizing IBM Netfinity Servers for SAP R/3 and Windows NT
37.If your adapter is supported but not detected by Setup then do the following:
• Click Select From List..., then Have Disk....
• Specify the path to the driver and press Enter.
• Click OK to choose the driver and OK again to return to Setup.
38.When you are finished selecting network adapters, press Enter from the
Windows NT Server Setup screen.
39.Select Network Protocols to install and press Enter when finished.
40.Select Network Services to install and press Enter twice when finished.
41.You will now have to configure the settings for your Network Cards and press
then Enter.
42.You will now need to configure any Network Protocols specified earlier in the
setup. Information required for each protocol varies by your specific network
configuration.
Note: Enter the host name in the TCP/IP setup in the DNS folder in
lowercase.
43.Next, deselect any network bindings you do not wish to install and press Enter
twice to start the network and continue installation.
44.Enter the name of the domain to which this server will connect or enter only
the group name in the Workgroup field.
Note: You will have to know the user name and password to be able to
connect to the proper domain if your server should be a member of a domain.
45.Press Enter twice to Finish setup.
46.Select a proper date and time for the server as well as the appropriate time
zone and press Enter or click Close.
47.Select appropriate Display settings and click Test and then click OK to test
these settings.
48.Choose Yes when appropriate display settings are found and then press Enter
twice.
49.Setup now finishes copying files to the hard disk.
50.Remove diskette and CD-ROM and press Enter to restart the server.
51.Installation is now complete.
You have to install TCP/IP protocol for SAP R/3. Select the other
protocols if your network uses one of these. If you chose to
install Microsoft Internet Information Server, the TCP/IP
protocol is selected by default.
Note
If the Windows NT kernel is loaded it should now recognize all
installed processors in the system.
System Processors