Specifications

Configuring the Hardware and Installing Windows NT 59
To load the program insert the IBM ServeRAID and ServeRAID II configuration
diskette in the floppy drive. Then reboot the server from the floppy drive. The
RAID configuration utility is automatically loaded.
Figure 27. ServeRAID Configuration Utility Main Menu
2.12.3.1 ServeRAID Adapter Settings and Array Configuration
For this configuration, it is assumed that all drives you want to use are recognized
by the ServeRAID adapter and in ready state (RDY). You can check the current
configuration by selecting 2. View Configuration in the main configuration menu.
Initialize Configuration
When the ServeRAID adapter does not recognize all drives or there is an older
array configuration on the adapter, it is advisable to initialize the adapter
configuration, which will reset the adapter configuration, delete all old RAID
configurations, scan the SCSI bus for new drives and set all recognized drives to
the status of
ready .
1. Select 7. Advanced Functions in the configuration main menu.
2. Then select 7. Init/View/Synchronize Config.