Specifications
Configuring the Hardware and Installing Windows NT 57
Figure 24. APIC Settings
5. Scroll the list down to
BOOT SUBSYSTEM GROUP
and set the First Boot
Device to Boot IDE CD-ROM Hard Drive Image, the Second Boot Device to
Boot Floppy and the Third Boot Device to Boot Hard Disk. You can also set
the entry Perform Memory Test on Warm Boot to Disable. This saves a lot of
time as you have to reboot the server often during the system and Windows
NT intallation.
Figure 25. BOOT Options
6. Scroll the list further to MANAGEMENT SUBSYSTEM GROUP/ SYSTEM
MANAGEMENT OPTIONS and set the System Management Mode to Enable,
the SMM Time Stamp Source to Real-Time Clock, the Event Logging to
Enable and the PCI System Error Detection to Disable.
Figure 26. System Management Options
7. Go back to the main menu.
8. Select Save Configuration in the main menu.
9. Select Exit to finish the SCU and reboot your system.