Specifications

42 Optimizing IBM Netfinity Servers for SAP R/3 and Windows NT
Table 7 and Table 8 show the settings for the backplane jumper block J10.
Table 7. Backplane Option Jumper Block (J10)
Table 8. SCSI ID Settings on Jumper Block (J10)
Refer to IBM PC Server Technology and Selection Reference, SG24-4760 for
additional information.
2.7 Installing External Hard Drives in the EXP10
You can install ten half-high or slimline hard drives in an EXP10 storage
expansion unit. The EXP10 has four SCSI ports and can be divided in two SCSI
buses. In this way you can build two SCSI buses, each with up to five hard drives
or one SCSI bus with up to ten drives on it. It is not allowed to connect two or
more EXP10 together. The EXP10 contains also backplanes for the SCSI ID
distribution.
Figure 13 shows the front of the EXP10 and the SCSI IDs of the hard drive bays.
The SCSI ID assignment can be changed with switch settings. There is usually no
need to change the SCSI settings. Please refer to your user manual or the
redbook
IBM PC Server Technology and Selection Reference, SG24-4760 for
additional information.