Specifications

Configuring the Hardware and Installing Windows NT 33
Figure 8. Processor Card Jumper Block J1C1
• 1-2 L2 Cache = 512 KB
• 3-4 L2 Cache = 512 KB
• 5-6 L2 Cache = 1 MB
• 7-8 L2 Cache = 1 MB
2.4 RIBM Netfinity 7000 Memory Upgrade
The minimum main memory size for an SAP R/3 centralized or application server
is 256 MB. A database server should minimally contain 512 MB. Your main
memory configuration depends on your sizing recommendations.
The IBM Netfinity 7000 Server uses 60 ns, 168-pin, Error Correction Code (ECC),
Dual-Inline Memory Modules (DIMMs).
The following characteristics apply to IBM Netfinity 7000 Server memory:
• Memory is installed on a memory card attached to the system board.
Normally you do not need to change any jumper settings on the
processor cards for the processor upgrade. But if you upgrade a
Netfinity 7000 Pentium Pro 200 MHz 512 KB second level cache
model to a Pentium Pro 200 MHz 1 MB second level cache model
then check and change the cache size jumper settings on the
jumper block
J1C1 for both settings on the processor cards.
Note
If you want to upgrade your 200MHz/512 KB models of Netfinity 7000 with the
200MHz/1MB upgrade kit (#94G7147), you may be reequired to replace the
processor cards installed in the sysstem. Please check the FRU number on the
current installed processor cards. If it is 12J3352, your server processor cards
do not require this replacement. If the upgrade is reqwuired, you should order
1MB processor card options #94G7387 and replace both installed cards prior
MHz/1MB processor.
Requirements for the 200MHz/1MB