Specifications

150 Optimizing IBM Netfinity Servers for SAP R/3 and Windows NT
5.4.2.3 Oracle Control Files
The following Oracle control files should be stored on separate disks:
\ORACLE\<SAPSID>\origlogA\ctrl<SAPSID>.ctl
\ORACLE\<SAPSID>\saparch\ctrl<SAPSID>.ctl
\ORACLE\<SAPSID>\sapdata1\ctrl<SAPSID>.ctl
5.4.2.4 Recommended Disk Configurations
The following is an example of a recommended disk configuration:
Disk1: \ORACLE\<SAPSID>\origlogA
\USR\SAP\TRANS
Disk2: \ORACLE\<SAPSID>\origlogB
\ORACLE\<SAPSID>\sapreorg
Disk3: \ORACLE\<SAPSID>\mirrlogA
\ORACLE\<SAPSID>\saptrace
\ORACLE\<SAPSID>\sapbackup
Disk4: \ORACLE\<SAPSID>\mirrlogB
\ORACLE\<SAPSID>\sapcheck
\USR\SAP
Disk5: \ORACLE\<SAPSID>\sapdata1
Disk6: \ORACLE\<SAPSID>\sapdata2
Disk7: \ORACLE\<SAPSID>\sapdata3
Disk8: \ORACLE\<SAPSID>\sapdata4
Disk9: \ORACLE\<SAPSID>\sapdata5
Disk10: \ORACLE\<SAPSID>\sapdata6
Disk11: \ORACLE\<SAPSID>\saparch
5.4.2.5 Minimal Disk Configuration
This configuration should be used only for test or demo systems.
Disk1: \ORACLE\<SAPSID>\saparch
Disk2: \ORANT
\ORACLE\<SAPSID>\sapreorg
\USR\SAP\TRANS
\ORACLE\<SAPSID>\origlogA
\ORACLE\<SAPSID>\origlogB
\ORACLE\<SAPSID>\sapdata1
\ORACLE\<SAPSID>\sapdata2
\ORACLE\<SAPSID>\sapdata3
Disk3: \ORACLE\<SAPSID>\mirrlogA
\ORACLE\<SAPSID>\mirrlogB
\ORACLE\<SAPSID>\saptrace
\ORACLE\<SAPSID>\sapbackup
\ORACLE\<SAPSID>\sapcheck
\USR\SAP
\ORACLE\<SAPSID>\sapdata4
\ORACLE\<SAPSID>\sapdata5
\ORACLE\<SAPSID>\sapdata6
A production Netfinity system running SAP must run in
ARCHIVELOG mode.
Note: