User`s guide

4-2

PowerDomain 2940UW/3940UW User’s Guide

Stock Number: 510864-00, Rev. B Page: 4-2

Print Spec Number: 493742-00

Current Date: 2/20/96 ECN Date: 2/27/96

Answer the following questions first if a problem occurs during

installation.

■ Are the power cables and SCSI cables properly connected?

(See Connecting SCSI Cables and Devices on page 2-19.)

Follow the instructions in the computer and SCSI device

documentation for installing SCSI devices.

■ Is the PowerDomain 2940UW/3940UW firmly seated and

secured in the PCI expansion card slot?

■ Does each SCSI device on a particular SCSI chain, including

the PowerDomain 2940UW/3940UW, have a unique SCSI

ID? (See Setting SCSI IDs on page 2-54.)

Check the SCSI device installation manual for information

about setting the SCSI ID.

■ Is SCSI termination set correctly? (See Setting SCSI Chain

Termination on page 2-48.)

If you still haven’t resolved your problem, read on.

If your computer hangs or the accelerator card cannot always find

the SCSI devices

■ Be sure SCSI termination is set correctly.

■ Check cable length and integrity.

■ After a hang, turn OFF your computer and any devices

connected to it, and then turn the system

ON again to reset the

SCSI chain.