User`s guide

3-19
Opening and Using the PowerDomain Control Utility
PowerDomain 2940UW/3940UW User’s Guide
Stock Number: 510864-00, Rev. B Page: 3-19
Print Spec Number: 493742-00
Current Date: 2/20/96 ECN Date: 2/27/96
Click Enable to enable SCSI Disconnection; click Disable to disable
SCSI Disconnection. (A check mark to the left of the selected target
indicates that any changes you made to that target have not yet
been saved.)
Wide Negotiation
Wide Negotiation is normally negotiated between the SCSI
accelerator card and the device connected to it. However, some old
devices might not work correctly with Wide Negotiation enabled.
Click Enable to enable Wide Negotiation; click Disable to disable
Wide Negotiation. (A check mark to the left of the selected target
indicates that any changes you made to that target have not yet
been saved.)
Note: If Wide Negotiation is disabled, all data transfers
will run at narrow speeds.
Synchronous Transfer Rate
SCSI Disconnection
Wide Negotiation