User`s guide

3-15
Opening and Using the PowerDomain Control Utility
PowerDomain 2940UW/3940UW User’s Guide
Stock Number: 510864-00, Rev. B Page: 3-15
Print Spec Number: 493742-00
Current Date: 2/20/96 ECN Date: 2/27/96
To change the Initiator ID, select an Initiator ID from the Select
Initiator ID menu. The current Initiator ID is indicated by a filled
circle on the left. (A check mark to the left of the selected SCSI bus
indicates that any changes you made to that bus have not yet been
saved.)
Setting Defaults
To reset all controls for the selected SCSI accelerator card to their
default values, choose Set To Default from the Special menu.