User`s guide

3-14
PowerDomain 2940UW/3940UW User’s Guide
PowerDomain 2940UW/3940UW User’s Guide
Stock Number: 510864-00, Rev. B Page: 3-14
Print Spec Number: 493742-00
Current Date: 2/20/96 ECN Date: 2/27/96
Setting Advanced Options
Parity Options
Click Parity on to enable parity checking. Click Parity off to disable
parity checking. Parity Options are set to Parity on for most SCSI
devices. (A check mark to the left of the selected SCSI bus indicates
that any changes you made to that bus have not yet been saved.)
Select Initiator ID
The Initiator ID is the ID of the SCSI accelerator card. This setting
is usually 7. However, if another device is set to 7 and its setting
cannot be changed, the Initiator ID option enables you to change
the accelerator card’s ID. Some software might not work correctly
when this ID is not set to 7.
Parity Options Select Initiator ID